High duty cycle, highly efficient fiber coupled 940-nm pump module for high-energy solid-state lasers
R. Platz, B. Eppich, J. Rieprich, W. Pittroff, G. Erbert, and P. Crump
Published in:
High Power Laser Sci. Eng., vol. 4, e3 (2016).
Abstract:
Tailored diode laser single emitters with long (6 mm) resonators and wide (1.2 mm) emission apertures that operate with 940 nm emission wavelength were assembled in novel edge-cooled vertically stacked arrays, and used to construct a compact and highly efficient fiber coupled pump source for Yb:YAG pulsed high-energy class solid-state lasers. The novel configuration is shown to allow repetition rates of 200 Hz at 1 ms pulse duration, at an output power of 130 W per single emitter. The emission of two stacked arrays was then optically combined to realize pump modules that deliver 6 kW peak power (pulse energy 6 J) from a 1.9 mm core diameter fiber, with wall plug efficiency of 50%. This represents a significant improvement in terms of duty cycle and electro-optical efficiency over conventional sources. The pump module has been successfully tested at the Max Born Institute, Berlin during trials for pumping of disk lasers.
Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Straße 4, 12489 Berlin, Germany
Keywords:
diode laser; diode pumped solid-state laser; fiber coupling; high-power; QCW diode laser stack.
© Copyright Cambridge University Press 2016. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the Cambridge University Press.
Full version in pdf-format.